Solar and battery installer glossary
This glossary explains, in plain language, the terms solar and battery storage contractors use from the first quote to grid connection. It is written for installers, sales advisors and office staff, and for homeowners who want to understand their proposal.
Terms, A to Z
- AC coupling
- Connecting a battery to a solar system on the AC side, through its own inverter. Common when adding storage to an existing solar installation.
- Backup (critical) loads panel
- A sub-panel holding the circuits that must stay powered during an outage, such as a well pump, furnace or milk cooling, supplied by the battery when the grid is down.
- Battery capacity (kWh)
- The amount of energy a battery can store, in kilowatt-hours. A 10 kWh battery can supply 1 kW for about 10 hours.
- Battery power (kW)
- How much power a battery can deliver at once, in kilowatts. It decides how many appliances can run together during an outage.
- Commissioning
- The final checks and start-up of a system after installation, confirming it operates safely and as designed.
- DC coupling
- Connecting a battery on the DC side of a hybrid inverter, sharing one inverter with the solar panels.
- Hybrid inverter
- An inverter that manages solar panels, a battery and the grid connection in one unit.
- Interconnection
- The utility's approval process and the physical connection that allow a solar or battery system to operate in parallel with the grid.
- Inverter
- The device that converts the DC electricity from panels or batteries into AC electricity used by the building and the grid.
- Islanding
- When a system keeps powering a building while the grid is down. Grid-tied systems must prevent unintentional islanding to protect line workers.
- kW vs kWh
- kW measures power (a rate); kWh measures energy (an amount over time). Solar systems are sized in kW; consumption and battery storage are measured in kWh.
- Load calculation
- An estimate of a building's electrical demand, used to check that the service and panel can accept a new system.
- Main service panel
- The building's main electrical panel where utility power enters. Its rating (for example 200 A) can limit how large a solar or battery system can be connected.
- Microinverter
- A small inverter mounted under each solar panel, converting power panel by panel.
- Net metering
- A utility billing arrangement where surplus solar energy sent to the grid is credited against energy drawn later.
- Payback period
- The number of years it takes for a system's savings and incentives to equal its cost.
- Permit plan set
- The package of drawings submitted to the authority having jurisdiction to obtain a permit: typically a site plan, roof or ground layout, single-line diagram, electrical details, structural information, equipment data sheets and labels.
- Production estimate
- A forecast of how many kWh a solar system will produce per year, based on location, orientation, tilt and shading.
- Proposal design
- The preliminary system design shown to a client: panel layout, system size, production estimate, equipment list and price.
- Racking
- The mounting structure that holds solar panels on a roof or on the ground.
- Rapid shutdown
- A safety function that quickly reduces voltage in rooftop solar conductors so firefighters can work safely. Required by electrical codes in many jurisdictions.
- Roof framing (trusses or rafters)
- The roof structure that must carry the added weight of panels and racking; it is checked during engineering, often from attic photos.
- Self-consumption
- The share of solar production used on site rather than sent to the grid. Batteries increase self-consumption.
- Shading analysis
- A study of how trees, buildings and roof features block sunlight on the panels over the year.
- Single-line diagram (SLD)
- A simplified electrical drawing showing how panels, inverters, batteries, disconnects, meters and the main panel connect. A core page of every permit set.
- Site survey
- A visit or remote review to measure the roof or ground area, check the electrical panel and collect photos before design.
- Stamped plans
- Drawings sealed by a licensed professional engineer, required by some jurisdictions for structural or electrical approval.
- String inverter
- A central inverter connected to one or more strings of panels wired in series.
- System size (kWdc / kWac)
- The rated power of a solar array on the DC side (sum of panel ratings) or on the AC side (inverter output).
- Utility meter
- The device measuring energy flowing to and from the grid. A bidirectional meter is usually installed for net metering.
Frequently asked questions
What documents are in a solar permit plan set?
Typically a site plan, roof or ground layout, single-line diagram, electrical details, structural information, equipment data sheets and required labels.
What is the difference between kW and kWh?
kW is power, the rate of energy flow; kWh is energy, the amount used or stored over time.
What is a single-line diagram?
A simplified drawing showing how all the electrical components of a solar or battery system connect, from the panels to the main service panel and the utility meter.
Related
Your whole business. One command center.
The AI operating system for owners of electrical, solar, battery and heat pump businesses. White-glove setup led by an analyst, kept running by AI.